Care and Usage
Instructions

› Sit in the chair. If the seat tilt is adjustable, adjust the seat so that it is approximately horizontal to follow the profile of the underside of the thighs.

› Adjust the seat height so that your feet are resting flat on the floor. Your feet should take the weight of your legs for good circulation.

› Adjust the forward-back movement of the backrest to give firm support while sitting upright.

› Adjust the height of the backrest to give support to the lumbar region of your back.

› Your forearms should slope gently down to the height of the keyboard when working at a desk.

› For computer work, set the seat tilt to be horizontal or incline it slightly back, and for writing work incline the seat slightly forward.

› Sitting upright, position the monitor screen viewing distance of 650mm, with midline screen height 100mm below eye level and angle screen at 5 degrees.

› If fitted with seat slide, adjust the seat length/depth to give 50mm clearance for calves

› Arm rest height should be 20mm below elbow level.

› Chair may require adjustment during working day.

Castor

› Axle is pre-lubricated for years of smooth running. Check that castors do not become clogged with carpet fibres

Gas Lift

› No maintenance is required; however, it is recommended adjusting the lift upwards and downwards to help lubricate monthly

Upholstery 

› Protect from direct sunlight and vacuum regularly using low suction

Spot Cleaning

› Gently scrape any soil or mop any liquid from the surface of the fabric

› Do not saturate the fabric or interior with water or other cleaning products

› Spot clean using only dry shampoo or drycleaning fluid

› For fixed covers professional cleaning is recommended

Leather and Vinyl

› Do not dry clean or wash

› Do not apply chemicals, detergents, solvents, aerosols, furniture polish, shoe polish or floor polish

› Wipe away all spillages promptly using warm water and a soft cloth

› For leather, treat annually with leather renovating cream

Foams and Fabrics

› Foams and fabrics on this chair comply with the flammability requirements of AS/NZS 4088.1

Warning

› Please do not tamper with or remove gas lift

› Do not sit on back of chair or rock backwards while seated in chair

› Hard tyred castors are for use on soft floors

› Soft tyred castors are for use on hard flooring and firm chair mats

Chair Solutions Pty Ltd warrants all chairs for the stated period, under standard 40 hours per week usage (unless stated in writing, from the date of manufacture, to be free from defects in materials and workmanship. Chair Solutions retains the right to repair or replace at its own discretion. Warranty includes parts and labour. This warranty applies to the original purchaser only, proof of purchase is required. All products are warranted for a period of five (5) years or as otherwise specified.

Parts included under this warranty are non-moving metal components, chair frame, pneumatic cylinder, upholstery and all other parts. This warranty is based on an 8 hour shift for the users weighing up to 120kgs on standard mechanism, 135kg on heavy duty mechanism and 160kg on an extra heavy duty mechanism.

Warranty terms do not cover:

› General wear and tear associated with everyday use

› Damage, abuse, misuse, or abnormal use

› Products which have been modified

› Excessive load above the specified weight

› Transportation Charges and Damages

› Fabric is covered under the fabric manufacturer’s warranty

ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED ARE EXCLUDED.

Please return this chair to Chair Solutions for recycling. This chair has more than 90% recyclable material. Full product stewardship programme for recycling at 5 locations including Sydney, Melbourne, Brisbane, Perth and NZ. Lowest carbon footprint guaranteed. Go Green!